All Product Categories

Coupling Sleeve
Coupling Sleeve for Drilling Rod, Measures 150 to 300mm Length - 31-R38-55-150-23

Drill Pipe Subs
DTH Drill Pipe Subs with Diameter Ranging from 77 to 146mm and 120 to 235mm Length - 77-146mm-8

Drilling Bits
Button Bit-long Hole Rock Drilling Bits with 64, 70, 76 and 89mm T38, Available in Various Series - 64-115mm-Retrac-short skirt-10-2 

Drill Bits
Chisel Drill Bits with 32 to 42mm Diameter Range and 4/7° Taper, Various Tip Sizes are Available - 32-42mm-7-2 

Button Bit
Button Bit, Used as Rock Drilling Bits, Available in T38, T45 and T51 Types - 64-115mm-9-2 

Tapered Bit
Small Hole Tapered Bit, Used in Quarrying, Drilling and Mining - 111-40-13/1431-42-53/1435-42-35-2

Drifting Bits
Drifting Bits, Suitable for Rock Drilling/Blasting/Mining - 1431-33R25-45-41-2

Drilling Button Bit
Bench/Long-hole Drilling Button/Retract/Cross/Guide/Reaming Bits for Rock Drilling - 1432-89T51-513/813-45-41-2

Drilling Button Bit
Bench/Long-hole Drilling Button/Retract/Cross/Guide/Reaming Bit for Rock Drilling - 1432-89T51-513/813-45-41

Bit
Drifting and Tunneling Reaming Bit with 64 to 127mm Outer Diameter Range, Suitable for Drilling - 1441-646-48/89-45-41

Bits
Drifting Bits, Suitable for Drilling - 1431-33R25-45-41

Coal Mining Bits
Abrasion-resistant Coal Mining Bits, Used for Hard Limestone Rocks - U-76-9

Drilling Bit
Rock Drilling Bit with Furnace Tapping Tools, 45 to 100mm Diameter and R32/R38/T38 Thread - 45mm-100mm-9

Drilling Bits
Button Bit-long Hole Rock Drilling Bits with 64, 70, 76 and 89mm T38, Available in Various Series - 64-115mm-Retrac-short skirt-10

Button Bits
Button Bits, Used as Rocking Drilling Bits of Spherical and Parabolic Button Type,quarrying tools - 64-115mm-Retac-10

Drill Bit
Cross Drill Bit, Used as Rock Drilling Tool Bits, with Diameter Ranging from 32 to 42mm - cross32-42mm-8

Low Air Pressure DTH Bit
Low Air Pressure DTH Bit, Parabolic Button and Convex Face, Used as Rock Drilling Tools Quarrying - CIR80-90-8

Drilling Bits
Button Bit-long Hole Rock Drilling Bits with 64, 70, 76 and 89mm T38, Available in Various Series - 64-115mm-Retrac-short skirt-9

Drifting rods
Drifting rods, used in quarrying, blasting and mining - 22H35-R35/T38-23

Extension Rods
Small Hole Hexagonal Extension Rods for Drilling - 23H22-R22(R25)-0800-40